How to wash modal in the IPSO CW10C Coin Front-Load Washer
Lavo
Modal · IPSO CW10C
- Programme
- Perm Press/Warm
- Temperature
- 20C
- Spin
- 500 rpm
- Typical time
- 0:30
Checked July 2026 · same engine as the app
To wash modal on an IPSO CW10C Coin Front-Load Washer, select the Perm Press/Warm programme at 20C with a 500 rpm spin, add a suitable detergent and start the cycle. Modal stretches and loses shape when washed warm or spun hard. Wash cool on a gentle cycle with a low spin to keep its shape.
The IPSO CW10C Coin Front-Load Washer panel with the Perm Press/Warm programme selected, exactly as the Lavo app shows it.
On the machine
- 1Turn the cycle pads to Perm Press/Warm.
- 2Set the temperature to 20C and the spin to 500 rpm.
- 3Press green START pad. Expect around 0:30.
Why these settings
Modal is a soft viscose type fibre, wash cool and gentle to keep its shape.
The risk: Modal stretches and loses shape when washed warm or spun hard.
The rule worth remembering: Wash cool on a gentle cycle with a low spin to keep its shape.
This page answers one frozen question.
100% modal on this machine. Your actual garment is probably a blend, has a history, and might have no label at all. The Lavo app reads the real garment from a photo and answers in seconds. Coming to the App Store.
Asked at the launderette
What temperature should I wash modal at on an IPSO CW10C Coin Front-Load Washer?
Wash modal at 20C using the Perm Press/Warm programme on the IPSO CW10C Coin Front-Load Washer. Modal stretches and loses shape when washed warm or spun hard.
What spin speed is safe for modal?
Use 500 rpm. A gentler spin removes enough water without stressing the fibres. Wash cool on a gentle cycle with a low spin to keep its shape.
Do I need the care label to wash modal?
No. Lavo identifies the fabric and condition from a photo of the garment itself and gives the exact setting for your IPSO CW10C Coin Front-Load Washer, even when the care label is faded, cut out, or missing.
What happens if I wash modal too hot?
Modal stretches and loses shape when washed warm or spun hard. That is why the safe setting here is 20C on the Perm Press/Warm programme.