How to wash nylon in the Beko EnergySpin BM3WT3941
Lavo
Nylon · Beko BM3WT3941
- Programme
- Synthetics
- Temperature
- 30C
- Spin
- 600 rpm
- Typical time
- 2:15
Checked July 2026 · same engine as the app
To wash nylon on a Beko EnergySpin BM3WT3941, select the Synthetics programme at 30C with a 600 rpm spin, add a suitable detergent and start the cycle. Nylon weakens and can shine or scorch under high heat. Wash cool on a synthetics cycle and air dry rather than tumble hot.
The Beko EnergySpin BM3WT3941 panel with the Synthetics programme selected, exactly as the Lavo app shows it.
On the machine
- 1Turn the Programme Selection knob to Synthetics.
- 2Set the temperature to 30C and the spin to 600 rpm.
- 3Press Start / Pause. Expect around 2:15.
Why these settings
Nylon is strong but heat sensitive, wash cool and avoid high spin to protect the fibres.
The risk: Nylon weakens and can shine or scorch under high heat.
The rule worth remembering: Wash cool on a synthetics cycle and air dry rather than tumble hot.
This page answers one frozen question.
100% nylon on this machine. Your actual garment is probably a blend, has a history, and might have no label at all. The Lavo app reads the real garment from a photo and answers in seconds. Coming to the App Store.
Asked at the launderette
What temperature should I wash nylon at on a Beko EnergySpin BM3WT3941?
Wash nylon at 30C using the Synthetics programme on the Beko EnergySpin BM3WT3941. Nylon weakens and can shine or scorch under high heat.
What spin speed is safe for nylon?
Use 600 rpm. A gentler spin removes enough water without stressing the fibres. Wash cool on a synthetics cycle and air dry rather than tumble hot.
Do I need the care label to wash nylon?
No. Lavo identifies the fabric and condition from a photo of the garment itself and gives the exact setting for your Beko EnergySpin BM3WT3941, even when the care label is faded, cut out, or missing.
What happens if I wash nylon too hot?
Nylon weakens and can shine or scorch under high heat. That is why the safe setting here is 30C on the Synthetics programme.