lavo

How to wash nylon in the Samsung WW90TP44DSH

Lavo

Nylon · Samsung WW90TP44DSH

Programme
Synthetics
Temperature
30C
Spin
400 rpm
Typical time
1:20

Checked July 2026 · same engine as the app

To wash nylon on a Samsung WW90TP44DSH, select the Synthetics programme at 30C with a 400 rpm spin, add a suitable detergent and start the cycle. Nylon weakens and can shine or scorch under high heat. Wash cool on a synthetics cycle and air dry rather than tumble hot.

SAMSUNGSynthetics30-400SmartThings

The Samsung WW90TP44DSH panel with the Synthetics programme selected, exactly as the Lavo app shows it.

On the machine

  1. 1Turn the jog dial to Synthetics.
  2. 2Set the temperature to 30C and the spin to 400 rpm.
  3. 3Press Start / Pause. Expect around 1:20.

Why these settings

Nylon is strong but heat sensitive, wash cool and avoid high spin to protect the fibres.

The risk: Nylon weakens and can shine or scorch under high heat.

The rule worth remembering: Wash cool on a synthetics cycle and air dry rather than tumble hot.

This page answers one frozen question.

100% nylon on this machine. Your actual garment is probably a blend, has a history, and might have no label at all. The Lavo app reads the real garment from a photo and answers in seconds. Coming to the App Store.

Join the queue

Asked at the launderette

What temperature should I wash nylon at on a Samsung WW90TP44DSH?

Wash nylon at 30C using the Synthetics programme on the Samsung WW90TP44DSH. Nylon weakens and can shine or scorch under high heat.

What spin speed is safe for nylon?

Use 400 rpm. A gentler spin removes enough water without stressing the fibres. Wash cool on a synthetics cycle and air dry rather than tumble hot.

Do I need the care label to wash nylon?

No. Lavo identifies the fabric and condition from a photo of the garment itself and gives the exact setting for your Samsung WW90TP44DSH, even when the care label is faded, cut out, or missing.

What happens if I wash nylon too hot?

Nylon weakens and can shine or scorch under high heat. That is why the safe setting here is 30C on the Synthetics programme.