How to wash polyester in the Samsung WW90TP44DSH
Lavo
Polyester · Samsung WW90TP44DSH
- Programme
- Synthetics
- Temperature
- 30C
- Spin
- 400 rpm
- Typical time
- 1:20
Checked July 2026 · same engine as the app
To wash polyester on a Samsung WW90TP44DSH, select the Synthetics programme at 30C with a 400 rpm spin, add a suitable detergent and start the cycle. Polyester traps odour and can pill or hold creases if washed hot. Wash at 30C, turn inside out, and skip high heat in the dryer.
The Samsung WW90TP44DSH panel with the Synthetics programme selected, exactly as the Lavo app shows it.
On the machine
- 1Turn the jog dial to Synthetics.
- 2Set the temperature to 30C and the spin to 400 rpm.
- 3Press Start / Pause. Expect around 1:20.
Why these settings
Polyester is easy care but holds odour and is heat sensitive, wash cool to avoid setting smells.
The risk: Polyester traps odour and can pill or hold creases if washed hot.
The rule worth remembering: Wash at 30C, turn inside out, and skip high heat in the dryer.
This page answers one frozen question.
100% polyester on this machine. Your actual garment is probably a blend, has a history, and might have no label at all. The Lavo app reads the real garment from a photo and answers in seconds. Coming to the App Store.
Asked at the launderette
What temperature should I wash polyester at on a Samsung WW90TP44DSH?
Wash polyester at 30C using the Synthetics programme on the Samsung WW90TP44DSH. Polyester traps odour and can pill or hold creases if washed hot.
What spin speed is safe for polyester?
Use 400 rpm. A gentler spin removes enough water without stressing the fibres. Wash at 30C, turn inside out, and skip high heat in the dryer.
Do I need the care label to wash polyester?
No. Lavo identifies the fabric and condition from a photo of the garment itself and gives the exact setting for your Samsung WW90TP44DSH, even when the care label is faded, cut out, or missing.
What happens if I wash polyester too hot?
Polyester traps odour and can pill or hold creases if washed hot. That is why the safe setting here is 30C on the Synthetics programme.